Safety and Quality Assurance
Safety
Fenner Conveyor Belting meets the safety requirements of all the major mining nations and has been tested and/or approved by the appropriate national authorities including:
| Country | Applicable standard |
|---|---|
| Australia | AS 4606 |
| Belarus | MI 600024712.001-2007 |
| Canada | CSA M422-M12 |
| China | MT914 |
| Czech Republic | CS EN 14973 C1 |
| Germany | DIN EN 14973 C2 |
| India | IS3181 |
| Italy | UNI EN 14973 C1 |
| Norway | NS EN 14973 C1 |
| Poland | PN EN 14973 C1 + PN-93-05013 |
| Portugal | IPQ EN 14973 C1 |
| South Africa | SABS 971 |
| Spain | UNE EN 14973 C1 |
| Russia | PD03-423-01 |
| Turkey | TS EN 14973 C1 |
| UK | BS EN 14973 C1 |
| Ukraine | GSTU 12.0018579.001-99 |
| USA | MSHA Title 30 Part 14 & MSHA 2G |
Fenner Conveyor Belting conveyor belt can be formulated to comply with the proposed fire propagation test outlined in the MSHA publication, Belt Evaluation Laboratory Test.
Fenner belt complies with the requirements of the ATEX Equipment Directive 2014/34/EU Equipment and protective systems intended for use in potentially explosive atmospheres.
Quality Assurance
In accordance with the requirements of our major customers, the planning, design, manufacture and quality control procedures of Fenner Europe have been assessed and are approved to Specification ISO 9001:2015, the International Standard for official approval of a manufacturer’s quality system.
The system approved under the above standard has been accepted by the USA Mines Safety and Health Commission, and a similar assessment of Fenner has been carried out by the Canadian Federal Energy Mines and Resources Department against the Canadian Standard CAN3Z299, 1-78 “Quality Assurance Programme Requirements” and by the Spanish LOM Authority.